Do you know about - Fracking and Tar Sands
Emission Testing Illinois! Again, for I know. Ready to share new things that are useful. You and your friends.Fracking
What I said. It isn't outcome that the true about Emission Testing Illinois. You check this out article for information on anyone wish to know is Emission Testing Illinois.How is Fracking and Tar Sands
We had a good read. For the benefit of yourself. Be sure to read to the end. I want you to get good knowledge from Emission Testing Illinois.Fracking is not a good thing if we're trying to reduce global warming causes and impacts. I provide a background on hydraulic fracturing and environmental impacts.
What is Hydraulic Fracturing or "Fracking"?
Hydraulic fracturing is the process of creating fractures in rock with the purpose of releasing a fluid under pressure. This "fluid" is usually gas or petroleum as far as the fossil fuel industry is concerned. These fractures also occur naturally as in the case of "veins" or "dikes", where magma from deep within the earth flowed towards the surface.
Oil and gas companies create their own fracturing of a rock layer with the sole purpose of extracting fuel. A bore hole is drilled into the geologic formation which contains the oil/gas. Then a highly pressurized fracking fluid is pumped into the hole leading to new channels in the rock and hence, allows for extraction of fossil fuels.
As the fluid is injected down the hole and the fracture opens, other materials are sometimes added to prevent the fractures from closing - especially when the injection processed has ended.
Not all wells are the same; some are very permeable whereas others are low volume wells, depending on the type of rock and geologic structures. And example might be shale for low permeability and sandstone for high permeability; the former uses 20,000 to 80,000 gallons of fluid while the latter can use up to 2-3 million gallons of fluid per well. There can be environmental issues in the disposal of this fluid.
Examples in Nature
"Veins" can be caused by seismic activity which leads to variations in stress levels of the rock. Differing volumes of fluids can be pumped into fractures during earthquakes. The fluids (usually containing minerals) can create a vein when pushed up through rock and then can harden and crystallize; sometimes a rock will appear one color and there will be a stripe of some other material in the rock.
The formation of a "dike" is similar to that of a vein. The difference is that the fluid filled cracks are molten rock, or magma. Sometimes in sedimentary rock with a lot of water content steam will be found at the leading edge of the magma. Obviously this feature would be more common in active geologic regions such as areas near the boundaries of the continental plates or along the "ring of fire".
Fracking to Release Fossil Fuels
As mentioned earlier "fracking" or "hydraulic fracturing" is using pressurized fluid to expand cracks in rock to release oil or gas from underground reservoirs. These reservoirs are typically found in porous sandstones, limestones, or dolomite rocks. Sometimes the deposit can be found in shale or coal beds. The oil/gas formations can be retrieved from as deep as 1.5 - 6.1 km (5,000-20,000 feet). Sometimes the formation just needs to be tapped and the pressure alone will allow it to shoot to the surface. Other times a conduit needs to be formed to draw the fossil fuels to the surface.
The fracture is created when pumping the fracking fluid at sufficient rates to exceed the fracture gradient of the rock. As the fracture grows, permeable material (like sand) is added to the hole to stabilize the well. The fuel can then be drawn upwards through the porous material.
Most hydraulic fracturing is performed in vertical wells. But the latest technology allows for horizontal wells also. The lateral drill hole can extend up to nearly 3 km (2 mi) in some cases. Vertical wells usually are only 15-90 meters (50-300 ft) deep. Hydraulic fracturing is employed by 90% of natural gas wells in the United States.
The fracturing fluid is a combination of water, chemical additives, and proppants (granular substances such as pellets or sand that help the fluid do its work). In addition there are sometimes gels, foams and compressed gases (i.e., nitrogen or carbon dioxide) added to the mixture. In addition to the fluids and equipment to propel the fluid, there is transportation and storage of the fluid and the resulting fuel.
The Marcellus Shale formation is one of the latest targets for fracking. This formation extending from West Virginia and Ohio eastward through Pennsylvania into New York State has had its share of news worthy stories, from estimated economic impacts and jobs, to taxation, to environmental concerns.
Environmental Concerns
There are plenty of environmental concerns when it comes to hydraulic fracturing, from contamination of ground water, pollution of the air and global warming impacts, to spills and mishandling of waste in the well location and health effects.
While the EPA has been aware of some possible contamination issues, there was doubt among officials (from testimony at Senate Hearing Committees) that the fracking process itself has affected ground water. The EPA studies were criticized for being too narrow in scope, such as concerns about water quality contaminated from transporting fracking fluids, some fish kills and even documented acid burns. Private well owners have complained about contamination. In 2005 hydraulic fracturing was exempted by the U.S. Congress from any regulation under the Safe Drinking Water Act!
The reports of contamination of water began to increase as fracking heated up. One amazing example took place in the town of Dimrock, PA with a report of 13 private wells found to be contaminated with methane. And one of them actually blew up. The local gas company was ordered to compensate the homeowners although they continued to deny responsibility. There have even been reports of radiation in fracking fluids that were released into nearby rivers.
Beyond ground water and possible surface pollution, there are the emissions of greenhouse gases which are the leading causes of global warming and air pollution at the surface. The emissions from the natural gas development and production include particulates, nitrogen oxides, sulfur oxide, carbon dioxide, and carbon monoxide. Other emissions linked to development include methane, ethane and volatile organic compounds (VOCs). The VOCs have been implicated in causing a range of health issues - from respiratory illness to neurological problems, birth defects and cancer.
Although natural gas burns cleaner than oil or coal and it is supposed to help lessen global warming, an amount of methane is typically released by these wells. And the methane over short time periods is actually worse than coal or oil due to how potent this greenhouse gas is (20-25 times more potent than CO2). The methane gradually breaks down and has a lifetime in the atmosphere of around 8-9 years (CO2 lasts around 100 years). So even if natural gas is burned efficiently, its carbon footprint is still worse than coal or oil for timescales less than 50 years.
Tar Sands
The Canadian Tar Sands, the Keystone Pipeline controversy, and the basics of environment preservation are covered here.
What Are Tar (Oil) Sands Anyway?
These geologic features are not the typical fossil fuel deposit that you usually think of. Most are familiar with coal, oil, and gas. Tar sands are a naturally occurring mixture of sand, clay, water, and a dense or viscous form of petroleum. This mixture has the appearance, odor, and color of "tar", hence the common name. These oil sands are found in extremely large amounts in Canada and Venezuela.
The tar sands are then mined and processed to extract the oil-rich material and then refined into oil. Extracting the oil is more complex than typical recovery as the process not only requires extraction and separation systems to remove the oil sludge from the clay, sand, and water, but also requires special dilution with lighter hydrocarbons (since so thick) to make it transportable by pipelines.
A lot of the world's oil is in the form of tar sands, this is estimated to amount to 2 trillion barrels! However not all of this oil is recoverable. Tar sands are found in many areas of the world (such as the Middle East), however by far the largest deposits are in Alberta Canada and Venezuela. There are even some tar sand deposits in the state of Utah.
A Little Industry Background
At this time oil is not produced from tar sands on a significant commercial level in the United States. Only Canada has a large-scale commercial oil sands industry. The industry, centered in Alberta, produces more than one million barrels of synthetic oil per day, or approximately 40% of Canada's oil production. The output from the Alberta-centered tar sands industry is growing rapidly. Around 20% of U.S. crude oil comes from Canada, with a large amount of this coming from the tar sands.
Recently prices for oil have risen to sufficient levels and technologies to extract the oil from sands have improved to the point to make production from oil sands commercially attractive.
The oil sands reserves have only recently gotten the headlines due to this combination of oil price and improved technologies. As long as these factors line up in a favorable way for industry we will continue to see oils sands remaining front page news.
As alluded to earlier getting the oil from the raw form to the usable form is no small undertaking. There is a lot involved in the process as will be covered next.
Extraction & Processing Overview
The oil sands can be extracted using open mining at the surface. New methods of the 1990's improved the efficiency of the mining which reduces the cost. The systems use large hydraulic and electrically powered shovels to dig the sands up and load them into gigantic dump trucks. The trucks carry up to 320 tons of tar sand per load.
After the sands are transported to a facility, hot water extraction is used to separate the oil sludge from the sand, water, and minerals. The resulting mixture is fed into an extraction plant where 'agitation' occurs. This releases oil and causes air bubbles that attach to the oil droplets. These droplets that float to the surface are then skimmed off. Further processing leads to synthetic crude oil.
Around two tons of oil sands are needed to produce one barrel of oil. After the oil is extracted, the used sand and other material are then returned to the mine, which is eventually reclaimed.
Other methods exist beyond strip mining such as: steam injection, solvent injection, and "fire floods" - in which oxygen is injected and part of the resource is burned. Steam injection is the favored method.
One of the latest current projects is the Keystone Pipeline. This pipeline is to transport synthetic crude oil from the oil sands of northeastern Alberta, Canada to several locations in the United States. The locations include refineries in Illinois, distribution hubs in Oklahoma and proposed refineries along the Gulf Coast of Texas. Basically there is an operational XL pipeline and possible expansion segments to the pipeline.
The Keystone pipeline has faced lawsuits from oil refineries, environmental organizations, and members of United States Congress. The latest clash was between some members of Congress and President Obama over legislation that would put approval of the expansion XL pipeline on the fast track to development. The President pushed back a decision until 2013. Of course environmental organizations have their own concerns and this will be covered in the next section.
Environmental Concerns & Conclusions
Mining and processing the oil sands wreaks havoc on the environment. The strip mining negatively affects wildlife and ecosystems and leftover by products and pollution from the strip mining can soak into the ground water supply and run off into rivers and streams. There is a large amount of dirty water that is produced from the process; only some can be recycled.
Some of the worst impacts are on the air however. Getting the oil from the oil sands with steam injection and refining leads to major global warming impacts. In fact this process leads to two to four times the amount of greenhouse gases per barrel of the end-product of refined oil as that produced when extracting conventional oil.
If you include the final numbers, from oil sands extraction to combustion you can see that this is one of the major causes of global warming; the emission is 10 to 45% more greenhouse gases than regular oil!
Obviously, as far environmental awareness is concerned, this is not the way to go if we are serious in reducing the causes of global warming. (Sources: ostseis.anl.gov and wikipedia)
If you'd like to learn more please check out my site: SurviveClimateChange
I hope you get new knowledge about Emission Testing Illinois. Where you may put to used in your day-to-day life. And most importantly, your reaction is Emission Testing Illinois. View Related articles related to Emission Testing Illinois. I Roll below. I even have recommended my friends to help share the Facebook Twitter Like Tweet. Can you share Fracking and Tar Sands.
No comments:
Post a Comment