Do you know about - Toyota Evaporative Emissions
Emissions! Again, for I know. Ready to share new things that are useful. You and your friends.Greetings fellow Toyota owners! Is your check engine light on? Do you have the famous p0440, p0441 or p0446 stored in your computer? Well you're in luck! I am going to talk a little about this problem Toyota has been having, how to fix it, and how to prevent it from happening again.
What I said. It isn't outcome that the real about Emissions. You look at this article for home elevators a person need to know is Emissions.How is Toyota Evaporative Emissions
We had a good read. For the benefit of yourself. Be sure to read to the end. I want you to get good knowledge from Emissions.Did you know that Toyota issued a Technical Service Bulletin issued for this problem? The Technical Service Bulletin simply goes into explaining that one or more of the above codes stored in the computer are due to an inoperative Canister Closed Vacuum Switching Valve. This TSB from Toyota allows the technician to quickly identify the problem so the tech can assign the correct fix. Or does it? Some of these Diagnostic trouble codes are fixed by replacing the Canister Closed Valve Vacuum Switching Valve (VSV valve) located on the air cleaner box, however most are not.
You see, all these codes are saying is that there is a leak in the Evaporative emission system. The evaporative emission control system prevents fuel vapors generated in the fuel tank from escaping into the atmosphere. These vapors are stored temporarily in the EVAP canister. When the vehicle is in operation, fuel vapors stored in the EVAP canister flow through the EVAP purge solenoid, purge port and intake manifold plenum to the combustion chamber and are burned in the combustion process. This increases gas mileage and decreases the emissions as well. The leak in the evap system could be anything from a loose or missing gas cap, to a stuck open purge valve.
This is where the diagnostics come into play. Many shops will just replace the vacuum switching valve as suggested in the TSB. But this may not take care of the problem. What many Toyota owners do not know, is that by topping of their tank after the gas pump has already stopped can cause serious problems in the evap system. When the gas tank is overfilled, the gas will actually back up and go into the evap system. Because the Evaporative Emission system is only designed to work with vapors, as soon as liquid gas enters the evap system, it starts to create problems immediately.
Another cause is when the charcoal in the Charcoal canister breaks apart and contaminates the whole system. This can happen with age as well as by overfilling your gas tank. The little charcoal bits will actually make their way from the rear of the vehicle by where the canister sits, to the front of the vehicle to the purge valve and the canister closed vacuum switching valve. When the computer opens and closes these valves, the charcoal bits will lodge into the all the valves in the system causing them to stick open when they are supposed to be closed. This is where the computer will recognize the leak in the evaporative emission system and flag your famous evap codes.
The fix: VSV valve. If the charcoal is breaking up in the canister, it will need to be replaced. It would be important to also replace the purge valve and canister vent shut valve as these are contaminated as well. Blowing compressed air through the lines will clean out any access derbies that will contaminate the system in the future.
So as you can see, this is a huge problem and Toyota is aware of it. Toyota has taken the right steps to fix this problem for the later generations models.
I hope you get new knowledge about Emissions. Where you can offer use within your day-to-day life. And most of all, your reaction is Emissions. View Related articles associated with Emissions. I Roll below. I even have counseled my friends to help share the Facebook Twitter Like Tweet. Can you share Toyota Evaporative Emissions.
No comments:
Post a Comment